Software Resetter for Printer Canon Pixma ip2770 and Tutorial

Canon iP2770 is newest all-in-one canon printer that designed for Home and small office user can print with maximal resolution up to 4800×1200 dpi. This canon printer using cartridge type PG-810, CL-811 (PG-810XL, CL811XL Optional) and using Hi-Speed USB 2.0 interface to connected to computer.

Canon Pixma iP 2770 support for Windows 2000 (SP4 only), Win XP, Vista and Windows 7 and also support for MAC OS: Macintosh OS X 10.4.11 – 10.6.

Here the tutorial reset for Canon ip2770 (Click the picture below to view the tutorial – the tutorial are is English and Thai language)

Download Software Resetter for Printer Canon Pixma ip2770 and Tutorial from link below:
tutorial | resetter

Read more

Tips Using Software Resetter for Epson Printer Without Change Date Setting

At some software resetter or adjustment program for epson need date setting at computer to use the software without error. sometime change date setting in computer very disturb. in fact there are some ways to use software resetter or adjustment program for epson without changing date setting in computer and without error.

Here how :

A. Using bat file or Create bat file

Create one bat file and copy this code. You can use notepad to create it. Place the bat file at the same folder with the adjustment program.

@echo off

echo %date% > currdate.txt

date 11-07-07

rd C:adjust~1 /s/q

REG DELETE HKEY_LOCAL_MACHINESOFTWAREEPSONPTSG /f

start/wait AdjProg.exe

B. Using Date Cracker Software

• Download and install Date Cracker and run the software.
• Click Add button, enter program description (example: Resetter Epson C90)
• Click add button the select the adjutment software then click open.
• Type date setting for the adjustment program in the simulated run date.
• Click run button to run the software.

Note : All this methods has been tested.

Read more

Epson Stylus Photo 1400 Resetter

Download

Read more

Canon MX338 Resetter

If you receive an error saying "Ink Absorber is Full". It means that your ink absorber inside your printer is almost full. In order to solve this you need to clear or reset the counter protection of your printer. To do this, follow this steps.

First make sure that the power cable and usb cable are connected, before you perform the reset procedure. And download the resetter at the bottom of this post.

FIRST STEPS:  Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter

1. After you download the resetter, extract it and double click "MX338.exe"
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the "Main" Button once, wait until the printing is done.
4. Then press "EEPROM Clear" button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!

Warning: Getting rid of the error message won’t change that you might end up with ink leaking out of the printer if you don’t either replace or clean them.

Please leave a comment. thank!

Click here

Read more